Recording Historic Buildings Before Restoration Begins

Recording Historic Buildings Before Restoration Begins

Why a Record Matters Before the Scaffolding Goes Up

Restoration is, by its nature, an act of change. Mortar is raked out and replaced, timbers are spliced, plaster is stripped back to the stone, and a wall that has stood for four hundred years is quietly altered forever. The record you make beforehand is the only durable evidence of what was actually there. It tells you what you are dealing with, it justifies the decisions you take, and it answers the question that will inevitably be asked in twenty years' time: "why did they do that?"

It also protects the building. Diocesan advisory committees, planning authorities and grant-giving bodies increasingly expect a proper record as part of any consent or faculty application. A measured survey and a set of condition notes are not paperwork for its own sake; they are the baseline against which the success of the work will be judged, and the evidence you will need if a crack widens or a beam is found to be rotten after the scaffold comes down.

Photography: Slow Down and Be Systematic

Photography is the quickest and most useful record, but only if it is done methodically. A few hundred random snapshots are far less valuable than fifty carefully framed images with a known position. Work through the building in a fixed order: approach views, all four elevations, roofscape, then interior by bay or chapel, then details.

  • Mark every camera position on a plan and number it, so each photograph can be located exactly.
  • Include a scale bar in every detail shot, plus a north arrow or a written note of orientation.
  • Use diffuse light where you can. Raking sun flatters a facade but hides surface texture; flash flattens mouldings and blows out inscriptions.
  • Take both a context shot and a close-up of every defect: one shows where it is, the other shows what it is.
  • Keep the unedited originals. Do not crop, straighten or delete "duff" frames until the whole record has been reviewed.

Photograph the obvious and the awkward: the underside of the floorboards, the back of the pulpit, the wall behind the organ, the top of the tower stair. These are precisely the places that will be inaccessible or gone once work starts.

Measured Drawings and Survey

Photographs show appearance; drawings show dimension. Even a simple tape-and-sketch survey is worth having, provided it is honest about what it does and does not cover. Establish one datum — a fixed level or a benchmark — and work from it rather than measuring everything relatively.

Note the thicknesses and depths that matter to a conservator: wall thicknesses, depth of window reveals, the section of principal timbers, the profile of mouldings, the size of bricks. Record phasing as you go, using the fabric itself as evidence. Brick sizes, mortar mixes, tool marks, lap lines and changes in stone coursing all tell you which parts belong together. A laser scan or photogrammetric model is excellent for complex roofs and vaulted interiors, but it must be supplemented with hand annotation; a point cloud does not explain itself.

Written Notes and Condition Schedules

Words do the work that neither photographs nor drawings can. Write plainly and specifically, in the present tense, describing condition rather than diagnosing cause. "The north aisle wall leans outward approximately 40mm over 2 metres" is useful. "The wall is failing" is not.

Where movement is suspected, set up monitoring before work begins: tell-tales, glass slides or fixed gauge points, read and dated at regular intervals, with weather conditions noted. Record previous interventions too — cement pointing, iron tie bars, Victorian re-pewing, a twentieth-century roof covering — because they will shape what is possible now. And keep a short daily site diary once work starts, so the record continues rather than stopping at the moment of greatest change.

Recording the Things That Will Move

Much of what matters most in a church is loose. Monuments, wall paintings, stained glass, bells, pews, floor tiles, brasses, inscriptions and even pencil graffiti in the tower will be moved, wrapped or lifted, and their original position is easily forgotten.

  • Photograph each item in situ before it is touched, with a rule for scale.
  • Give every object a unique reference number and apply the same number to the record, the wrapping and the crate.
  • Sketch positions on a plan, not just in a photograph, so the sequence can be reconstructed.
  • Look beneath: floors and shallow voids often conceal earlier levels, burials or fragments worth recording before excavation.

Filing, Copies and the Long Term

A record that cannot be found is not a record. Use a consistent file-naming convention — date, location, subject — and store the master copy in an uncompressed, widely readable format alongside a PDF version. Keep paper copies too, since digital archives depend on software that may not survive as long as the building.

Distribute the set: one copy for the parish, one for the diocesan office or planning authority, one for the county record office, and one retained by the architect or surveyor. Leave a duplicate in the building itself. The purpose of all this is simple and rather lovely — that whoever next lifts a floorboard or repoints a chancel arch will know exactly what their predecessors found, and will be able to leave the building better understood than they found it.